95 50940193/DP0415
Float allows the lowered lift arm to follow the ground contour while traveling over
changing ground conditions. It is useful when grading surfaces while driving the machine
in reverse.
Note: Lift arm float is not effective if the lift arm is lowered against the loader frame.
See “Lift Arm Float” on page 71 for details about the lift arm float control.
Hydraglide™ Ride Control System (Option)
Hydraglide™ cushions lift arm loads during transport. It provides a smoother ride over
uneven surfaces.
When ride control is activated, the lift arm may
drop slightly without a load, or several inches with
a heavy load.
Do not use Hydraglide™ when using pallet forks.
Important: Do not use Hydraglide™ when digging. Precise control of the digging
operation is difficult with the Hydraglide™ option activated.
Note: Hydraglide™ is not effective if the lift arm is lowered against the loader frame.
See “Hydraglide™ Ride Control System (Option)” on page 73 for details about
Hydraglide™ control.
To Next Page
Loading...
Need help?
General
