39 / 44
550
15 Disassembly
Disassembly is performed observing
the same precautionary measures as for
installation.
G Disassemble the valve (see chapter 12.1
"Disassembly of actuator").
G Unscrew the control medium line (see
chapter 11.4 "Connecting the control
medium").
16 Disposal
G All valve parts must be
disposed of according to
relevant local or national
disposal regulations /
environmental protection
laws.
G Pay attention to adhered
residual material and gas
diffusion from penetrated
media.
17 Returns
G Clean the valve.
G Request a goods return declaration form
from GEMÜ.
G Returns must be made with a completed
declaration of return.
If not completed, GEMÜ cannot process
credits or
repair work
but will dispose of the goods at the
operator's expense.
Note for returns:
Legal regulations for the protection
of the environment and personnel
require that the completed and
signed goods return declaration
is included with the dispatch
documents. Returned goods can
be processed only when this
declaration is completed.
18 Information
Note on Directive 2014/34/EU
(ATEX Directive):
A supplement to Directive 2014/34/
EU is included with the product if it
was ordered according to ATEX.
Note on staff training:
Please contact us at the address
on the last page for staff training
information.
Should there be any doubts or
misunderstandings in the preceding text,
the German version of this document is the
authoritative document!
To Next Page
Loading...
Need help?
General
