32 GSM19 Series Magnetometers - Version 7
GEM Systems, Inc. Advanced Magnetometers
For more technical information, visit www.gemsys.ca
0-9 digits can be entered.
A-dp places decimal point, after that only 2 more digits are allowed.
B
-+ toggles sign.
D-backsp backspace. Erases last digit (or decimal point) entered.
E-enter press if number is correct.
If you selected Line-Station positioning system, two screens are displayed: one for the Line and the
other for the Station settings.
SCREEN 12 LINE 00100 N F-OK
change A-number B-coordinates
EOL INCREMENT +00100
change C-sign D-number
LINE INCREMENT +00000
change E-sign 0-number
A changes line number.
B changes line cardinals. (N,NE,E,SE,S,SW,W,NW)
C changes EOL increment sign.
D changes EOL increment.
E changes line increment sign.
0 changes line increment.
NOTE:
The EOL increment only affects the Line number (see section 5.4.4).
To Next Page
Loading...
