29
Decommissioning / Storage
Shutdown
1. End the coating procedure
2. Switch off the control unit
The adjustments for high voltage, powder output volume and
electrode rinsing air remain stored.
When the product will not be used for several
days
1. Switch off the power to the control unit at the main switch
2. Clean the gun and the components for powder conveying (see
therefore the corresponding user manuals)
3. Turn off the compressed air main supply
Storage conditions
Hazard notes
There is no danger to personnel or the environment if the unit is stored
properly.
Type of storage
The product must be stored horizontally for safety reasons.
Storage duration
If the physical conditions are maintained, the unit can be stored
indefinitely.
Space requirements
The space requirements correspond to the size of the product.
There are no special requirements concerning distance to neighboring
equipment.
To Next Page
Loading...
