Gema OptiGun GA04-E - Product Description; Intended Use; A Summary of the Directives and Standards

Rev. 00 12/23
OptiGun GA04-E Product description
•
9
Product description
Intended use
This gun is used for electrostatic coating of objects connectable to ground
with inorganic, non-flammable enamel powders in conjunction with the
control units and accessories, as specified in the corresponding Type
Examination Certificate.
fig.
1
Observance of the operating, service and maintenance instructions
specified by the manufacturer is also part of the intended use. This
product should only be used, maintained and started up by trained
personnel, who are informed about and are familiar with the possible
hazards involved.
Any other use is not considered as intended use. The manufacturer is not
responsible for any incorrect use and the risks associated with such
actions are assumed by the user alone!
A summary of the directives and standards
This product is built according to the current state of the art. The product
is subject to the European directives and complies with the following
standards.
The product is suitable for the intended purpose and can be used in the
appropriate areas.
For further information, also refer to the enclosed Declaration of
Conformity.