Gema OptiGun GA04-E - Page 34

Rev. 00 12/23
34
•
Maintenance / Repairs OptiGun GA04-E
Required tools
Fig.
9
1 Allen key size 3 mm
2 Open-ended wrench 17 mm
3 Slotted screwdriver #5
4 Phillips screwdriver #2
ATTENTION
Incorrectly assembled parts may cause malfunctions or defects
► Observe the tightening torques when assembling!
► Use the appropriate torque wrench!
Dismantling procedure
1. Remove the threaded sleeve
2. Remove the nozzle
3.