Connecting the RP1100 to Your Network
The RP1100 is a versatile mobile computer that you can easily add to your wireless or wired data collection
network. You can connect your RP1100 using:
• 802.11 radio communications.
• Bluetooth communications.
• USB communications.
Note: The RP1100 radios are disabled when the battery is low. Attach a charger or replace the battery to re-
enable the radios.
Connecting the RP1100 Using WIFI Communications
Make sure all components with antennas are at least 30 cm (1 ft.) apart when power is applied.
Failure to comply could result in equipment damage.
Your RP1100 has an 802.11 radio to transfer data using wireless communications. This section assumes that
your wireless network is set up, including your access points.
To Next Page
Loading...
