Gen2wave RP1200 - Single Slot USB Cradle; Setup

RP1200 User‟s Manual
37
Single Slot USB Cradle
This section describes how to set up and use a Single Slot USB cradle with the RP1200. For USB
communication setup procedures see ActiveSync Chapter.
The Single Slot USB cradle:
• Synchronizes information between the RP1200 and a host computer. See ActiveSync Chapter for
information on setting up a partnership between the RP1200 and a host computer.
• Charges the RP1200‟s battery.
• Charges a spare battery.
Setup
Single Slot USB Cradle Power and USB Connections
 Select switch on right : USB Host
AC Power
5V, 3.5A
USB Client
USB Host