To set options for saving pictures
1. From the Pictures & Videos application, tap Menu > Options.
2. Set these options:
• (Optional) A filename prefix. The default prefix is .img.
• Where you want to save picture files.
• The still image compression level.
3. Click ok.
You can also set options for flash, video, quality, and some advanced options from the Settings menu.
Using a microSD Card
To install a microSD card
1. Remove the battery.
2. Insert the microSD card in the bottom slot.
3. Install the battery.
4. Turn on the RP1200
You should be able to navigate to the Storage Card folder and see the contents of the microSD card.
Enabling the Integrated GPS on the RP1200
The RP1200 comes equipped with an integrated Global Positioning System (GPS) receiver.
Using the A-GPS on the RP1200
To use A-GPS, you need to set parameter in G2W.INI which is located in
Flash Disk\G2W_Setup.
Remark:
G2W_INI is not directly settable on the RP1200.
To set INI parameter, you need to synchronize the RP1200 with your PC.
On the PC, you change INI parameter.
G2W_INI is convenient setting tool to control various functions
G2W_setup manual is available for download.
To configure your GPSID settings
Tap Start > Settings > System > External GPS
To Next Page
Loading...