• If you choose WPA-PSK, Data Encryption is automatically set to TKIP and you need to enter a
Network key.
• If you choose WPA2-PSK, Data Encryption should be set to AES and you need to enter a
Network key.
5. Tap Next.
6. For EAP type, select either PEAP or Smart Card or Certificate from the list and tap Finish. You
return to the Configure Wireless Networks page.
7. Tap Connect. The RP1200 prompts you to enter this network information:
User name
Password
8. Tap OK. Your device connects to the network.
9. Make sure that your RP1200 is talking to the network and that the network can see your RP1200. If
you are connected to the wireless network you will see a connected icon in navigation bar
and you will see the name of your network next to Wi-Fi in the Wireless Manager.
Wireless LAN is optional. You can only use WLAN, When the WLAN module is built in to the
device
To Next Page
Loading...
