Generac Power Systems 0K8420-A User Manual

Installation Guidelines for Spark-Ignited Stationary Emergency Generators 45
Section 8 Installation Checklists
8.1 — Safety Checklist
NOTE: See Chapter 1 for more information.
 Are manuals, wiring diagrams and other documentation readily available?
 Is there any evidence of freight damage?
 Does the enclosure have scratches or damage to painted surfaces (which would indicate lifting without a spreader
bar)?
 Are all guards, covers, insulation blankets and other protective devices in place?
 Are any parts or components worn, damaged or missing?
 Is the generator properly grounded?
 Is a fire extinguisher kept near the generator?
 Is there any evidence of oil or coolant leaks?
 Are any combustible materials left in the generator compartment?
 Is the area surrounding the generator clean and free of debris?
 Do these parameters meet all applicable codes and local jurisdiction?
8.2 — Installation Planning Checklist
NOTE: See Chapter 2 for more information.
 Is the generator set readily accessible for maintenance, repair, and firefighting purposes?
 Is the site clean and dry? Is the site provided with adequate drainage?
 Is there a minimum of five feet of clearance around the generator set to facilitate the repair or replacement of major
components?
 Have adequate provisions been made for installation of the fuel supply?
 Do these parameters meet all applicable codes and local jurisdiction?
8.3 — Foundations and Mounting Checklist
NOTE: See Chapter 3 for more information.
 Is the generator set installed on a concrete pad capable of supporting its weight and accessories?
 Is the generator securely fastened to the concrete pad using suitable grade, size and style fasteners?
 Is the concrete pad seated on a prepared solid subsurface using appropriate reinforcing bar or expanded wire
mesh?

Generac Power Systems 0K8420-A Specifications

General

Brand	Generac Power Systems
Model	0K8420-A
Category	Portable Generator
Language	English