Convenient features
5-10
Immobiliser system
The immobiliser system helps protect
your vehicle from theft. If an improperly
coded key (or other device) is used, the
engine’s fuel system is disabled.
When the Engine Start/Stop button
is pressed to the ON position, the
immobiliser system indicator should
come on briefly, then go off. If the
indicator starts to blink, the system does
not recognise the coding of the key.
Press the Engine Start/Stop button to
the OFF position, then press the Engine
Start/Stop button to the ON position
again.
In some circumstances, the vehicle may
not recognise your smart key if another
smart key device is nearby or a metal
object such as a key chain is causing
interference with the smart key.
If this occurs, your vehicle may not
start. Remove any metal objects or
additional keys near the smart key before
attempting to start the vehicle again.
If the system repeatedly does not
recognise the coding of the key, it is
recommended that you contact an
authorised retailer of Genesis products.
Do not attempt to alter this system
or add other devices to it. Electrical
problems could result that may make
your vehicle inoperable.
WARNING
In order to prevent theft of your vehicle,
do not leave spare keys anywhere in
your vehicle.
NOTICE
The transponder in your key is an
important part of the immobiliser
system. It is designed to give years
of trouble-free service, however you
should avoid exposure to moisture,
static electricity and rough handling.
Immobiliser system malfunction could
occur.
To Next Page
Loading...
Need help?
General
