EasyManuals Logo

Genesis GV70 2021 User Manual

Genesis GV70 2021
653 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #210 background imageLoading...
Page #210 background image
05
5-67
System operation
Display and control
• After selecting ‘High Beam Assist’
in the Settings menu, High Beam
Assist will operate by following the
procedure below.
- Place the headlamp switch in
the AUTO position and push
the headlamp lever towards the
instrument cluster. The High Beam
Assist (
) indicator light will
illuminate on the cluster and the
system will be enabled.
- When the system is enabled, high
beam will turn on when vehicle
speed is above 25 mph. When
vehicle speed is below 20 mph, high
beam will not turn on.
- The High Beam (
) indicator light
will illuminate on the cluster when
high beam is on.
• When High Beam Assist is operating, if
the headlamp lever or switch is used,
the system operates as follow:
- If the headlamp lever is pulled
towards you when the high beam
is off, the high beam will turn
on without High Beam Assist
cancelled. When you let go of the
headlamp lever, the lever will move
to the middle and the high beam
will turn off.
- If the headlamp lever is pulled
towards you when the high beam is
on by High Beam Assist, low beam
will be on and the system will turn
off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.
• When High Beam Assist is operating,
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an
oncoming vehicle is detected.
- When the tail lamp of a vehicle in
front is detected.
- When the headlamp or tail lamp of a
motorcycle or a bicycle is detected.
- When the surrounding ambient light
is bright enough that high beams
are not required.
- When streetlights or other lights are
detected.
System malfunction and
limitations
System malfunction
OJX1050235ROJX1050235R
When High Beam Assist is not working
properly, the ‘Check HBA(High Beam
Assist) system’ warning message
will appear and
warning light will
illuminate on the cluster. We recommend
that the system be inspected by an
authorised Retailer of Genesis Branded
Products.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genesis GV70 2021 and is the answer not in the manual?

Genesis GV70 2021 Specifications

General IconGeneral
BrandGenesis
ModelGV70 2021
CategoryAutomobile
LanguageEnglish

Related product manuals