Driver assistance system
7-58
OJX1079233L OJX1079233L
Warning overspeed
When driving at a speed higher than the
displayed speed limit, the red speed limit
indicator will blink.
ORG3070214NORG3070214N ORG3070215NORG3070215N
Changing set speed
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the set
speed needs to be changed. At this time,
the driver can change the set speed
according to the speed limit by using the
+ or – switch on the steering wheel.
:$51,1*
• ,IWKH2IIVHWLVVHWRYHUœŔWKHVHW
speed will change to a higher speed
WKDQWKHVSHHGOLPLWRIWKHURDG,I
\RXZDQWWRGULYHEHORZWKHVSHHG
OLPLWVHWWKH2IIVHWXQGHURUXVH
the – switch on the steering wheel to
ORZHUWKHVHWVSHHG
• (YHQDIWHUFKDQJLQJWKHVHWVSHHG
according to the speed limit of the
URDGWKHYHKLFOHFDQVWLOOEHGULYHQ
RYHUWKHVSHHGOLPLW,IQHFHVVDU\
GHSUHVVWKHEUDNHSHGDOWRUHGXFH
\RXUGULYLQJVSHHG
• If the speed limit of the road is under
NPKPSKWKHVHWVSHHG
FKDQJHIXQFWLRQZLOOQRWZRUN
• Intelligent Speed Limit Assist
operates using the speed unit in the
LQVWUXPHQWFOXVWHUVHWE\WKHGULYHU
If the speed unit is set to a unit other
WKDQWKHVSHHGXQLWXVHGLQ\RXU
FRXQWU\,QWHOOLJHQW6SHHG/LPLW
$VVLVWPD\QRWRSHUDWHSURSHUO\
Information
• For more details on system operation
of Manual Speed Limit Assist, refer to
“Manual Speed Limit Assist (MSLA)”
section in chapter 7.
• For more details on system operation of
Smart Cruise Control, refer to “Smart
Cruise Control (SCC)” section in
chapter 7.