Driver assistance system
7-118
6\VWHPVHWWLQJV
Setting functions for the system
OJX1050285ROJX1050285R
You can change Rear View Monitor
settings by pressing the setup icon
(
) on the screen whilst the system is
RSHUDWLQJRUVHOHFWœ'ULYHU$VVLVWDQFHƟ
3DUNLQJ6DIHW\Ɵ&DPHUD6HWWLQJVŔIURP
the Settings menu whilst the Engine
Start/Stop button is in the ON position.
OJX1070107ROJX1070107R
Parking/View button
Press the Parking/View button to turn on
Rear View Monitor.
Press the button again to turn off the
system.
For more details, refer to “System
Operation”.
6\VWHPRSHUDWLRQ
Rear view with parking guidance
The system will operate when the
following conditions are satisfied:
- Engine Start/Stop button in the ON
position
- The gear is shifted to R (Reverse) and
the back up light turns on
Maintaining rear view
• With the Engine Start/Stop button in
WKH21SRVLWLRQVHOHFWœ$GYDQFHGƟ
Keep Rear Camera’ from the Settings
menu to turn on the function and
deselect to turn off the function.
• When parking, the rear view will
maintain showing on the screen if the
following conditions are satisfied:
- The gear is shifted from R (Reverse)
to N (Neutral) or D (Drive)
- Vehicle speed is below 6 mph
• The rear view will turn off when
vehicle speed is above 6 mph.