Convenient features
5-20
OJX1050020ROJX1050020R
Integrated Memory System for the
driver’s seat is provided to store and
recall the following memory settings with
a simple button operation.
• Driver’s seat position
• Steering wheel position (power
adjustment)
• Outside rearview mirror position
• Dashboard illumination intensity
• Head-Up Display (HUD) position and
brightness (if equipped)
WARNING
Never attempt to operate the
integrated memory system whilst the
vehicle is moving.
This could result in loss of control, and
an accident causing death, serious
injury, or property damage.
Information
• If the battery is disconnected, the
memory settings will be erased.
• If integrated memory system does not
operate normally, we recommend that
you have the system inspected by an
DXWKRULVHG5HWDLOHURI*HQHVLV%UDQGHG
Products.
Storing memory positions
1. Shift to P (Park) whilst the Engine
Start/Stop button is in the ON
position.
2. Adjust the driver’s seat position,
outside rearview mirror position,
steering wheel position, dashboard
illumination intensity and head-up
display height/brightness to the
desired position.
3. Press the SET button. The system
will beep once and notify you ‘Press
button to save settings’ on the cluster
LCD display.
4. Press one of the memory buttons (1
or 2) within 4 seconds. The system
will beep twice when the memory has
been successfully stored.
5. ‘Driver 1 (or 2) settings saved’ will
appear on the cluster LCD display. The
message appears only for the driver’s
seat position memory setting.
,17(*5$7('0(025<6<67(0
To Next Page
Loading...
Need help?
General
