Driver assistance system
7-26
6\VWHPVHWWLQJV
Setting functions for the system
OJX1070143NOJX1070143N
Lane Safety
With the Engine Start/Stop button in the
ON position, select or deselect ‘Driver
$VVLVWDQFHƟ/DQH6DIHW\ŔIURPWKH
Settings menu to set whether or not to
use each function.
- If ‘Assist’ is selected, the system
will automatically assist the driver’s
steering when lane departure is
detected to help prevent the vehicle
from moving out of its lane.
- If 'Warning Only' is selected, the
system will warn the driver with an
audible warning and steering wheel
vibration when lane departure is
detected. The driver must steer the
vehicle.
- If ‘Off’ is selected, the system will turn
off. The
indicator light will turn
off on the cluster.
:$51,1*
• ,I:DUQLQJ2QO\LVVHOHFWHGVWHHULQJ
LVQRWDVVLVWHG
• /DQH.HHSLQJ$VVLVWGRHVQRWFRQWURO
WKHVWHHULQJZKHHOZKHQWKHYHKLFOH
LVGULYHQLQWKHPLGGOHRIWKHODQH
• 7KHGULYHUVKRXOGDOZD\VEHDZDUH
of the surroundings and steer the
YHKLFOHLIœ2IIŔLVVHOHFWHG
Turning the system ON/OFF
OJX1079096 OJX1079096
With the Engine Start/Stop button in the
ON position, press and hold the Lane
Driving Assist button located on the
steering wheel to turn off Lane Keeping
Assist. Press and hold the button again to
turn on the system.
Information
Whenever the engine is turned on, Lane
Keeping Assist will always turn on. The
white indicator light will illuminate
on the cluster.
When Lane Keeping Assist is on, press
and hold the Lane Driving Assist button to
turn off the system.