Driver assistance system
7-34
OJX1079180LOJX1079180L
When the engine is restarted with the
system off, the ‘Blind-Spot Safety System
is Off’ message will appear on the
cluster.
If you change the setting from ‘Off’ to
‘Active Assist’ or ‘Warning Only’, the
warning light on the outside rearview
mirror will blink for three seconds.
In addition, if the engine is turned on,
when the system is set to ‘Active Assist’
or ‘Warning Only’, the warning light on
the outside rearview mirror will blink for
three seconds.
:$51,1*
• ,Iœ:DUQLQJ2QO\ŔLVVHOHFWHGEUDNLQJ
LVQRWDVVLVWHG
• ,Iœ2IIŔLVVHOHFWHGWKHGULYHUVKRXOG
DOZD\VEHDZDUHRIWKHVXUURXQGLQJV
DQGGULYHVDIHO\
Information
If the engine is restarted, Blind-Spot
Safety system will maintain the last
setting.
OJX1079245LOJX1079245L
Warning Timing
With the Engine Start/Stop button in the
21SRVLWLRQVHOHFWœ'ULYHU$VVLVWDQFHƟ
Warning Timing’ from the Settings menu
to change the initial warning activation
time for Blind-Spot Safety system.
When the vehicle is first delivered,
Warning Timing is set to ‘Normal’. If you
change the Warning Timing, the warning
time of other Driver Assistance systems
may change.