Safety system
3-20
NOTICE
OJX1039117OJX1039117
If there is a problem with the second
row and/or third row seat automatic
folding/unfolding, a warning will sound.
If this occurs, we recommend that the
vehicle be inspected by an authorised
Retailer of Genesis Branded Products.
Automatic reverse
Whilst folding or unfolding the 2nd row
or 3rd row seats, when a consistent force
is detected, the seat returns to its original
position or stops operation.
However, automatic reverse function
may not work when the detected
resistance is below a specific level or the
seat is almost folded or unfolded. When
a strong impact is applied to the seat,
the automatic reverse function may be
activated even if no object is present.
If this occurs, check that any object is
caught and then operate the switch
again to check for abnormality.
When the automatic reverse function is
enabled, the angle of the seat back may
be changed. Reset the seatback angle by
pressing the remote folding/unfolding
button.
WARNING
Do not place any body part or object
in the operating area to intentionally
check the automatic reverse function.
Walk-in seat (7-seater)
To get in or out of the 3rd row seat:
OJX1030047ROJX1030047R
OJX1030048ROJX1030048R
1. Press the walk-in switch located on
the upper part (1) or the outer part (2)
of the second row seat.
2. The second row seatback will fold and
the seat will slightly move forward.
To Next Page
Loading...
Need help?
General
