09
9-17
2.5L T-GDI2.5L T-GDI
OJX1099058LOJX1099058L
7. If it is near or at L, add enough oil to
bring the level to F.
Use only the specified engine oil (Refer
to “Recommended Lubricants and
Capacities” section in chapter 2).
NOTICE
To prevent damage to your engine:
• Do not overfill with engine oil. Add oil
in small quantities and recheck level
to ensure engine is not overfilled.
• Do not spill engine oil when adding
or changing engine oil. Use a funnel
to help prevent oil from being spilled
on engine components. Wipe off
spilled oil immediately.
Diesel engine
3.0L TCI3.0L TCI
OJX1099002OJX1099002
Range Required action
A
Recommended to contact an
authorised Retailer of Genesis
Branded Products.
B Do not refill engine oil.
C
Normal.
You may add engine oil as long
as the oil level does not go
above the C range.
D
You must add oil and make
sure that the oil level is in the
C Range.
1. Follow all of the oil manufacturer’s
precautions.
2. Be sure the vehicle is on the level
ground in P (Park) with the parking
brake set and the wheels blocked.
3. Turn the engine on and allow the
engine to reach normal operating
temperature.
4. Turn the engine off and wait about
five minutes for the oil to return to the
oil pan.
5. Pull the dipstick out, wipe it clean, and
re-insert it fully.
6. Pull out the dipstick out again and
check the level. The level should be in
the C range.
To Next Page
Loading...
Need help?
General
