Camera Name:
This field is used to enter a descriptive name for the device.
The default setting for the Camera Name is CS-xxxxxx, where
xxxxxx is the last six digit of the MAC Address. The maximum
length is 32 (Printable ASCII).
Location:
This field is used to enter a descriptive name for the location used
by the IPCam SECURE300.
Admin:
This field is used to enter the Administrator ID along with the
password to access the System Administration settings. Be sure
to enter the password twice to confirm the details once in the
Admin Password field and again in the Confirm Password field.
The default setting for Admin is blank space (Null String), and
you need to key in the Admin ID with a maximum length of 12
(Printable ASCII) characters and enter the Admin Password with
a maximum length of 8 (Printable ASCII) characters.
It is highly recommended to set the Admin ID and Admin
Password as soon as possible to enable security option for the
IPCam SECURE300 to function.
IP Assignment:
27
Important Information
Access to the IPCam SECURE300 is done through assigning a proper
IP address. Please make sure to use a vacant IP address when you
assign the IP address for the IPCam SECURE300. This will prevent
errors from occurring if the IP address is overlapped.
To Next Page
Loading...