30
Note:
This function is built-in to the LED indicators to add extra
capabilities. The three options allow the Administrator to
configure and camouflage the illumination for the LED indicator
to falsify the monitoring status. In Normal Mode, the LED
indicator functions normally. Under Off Mode, the LED
indicators are both off; however, it is still monitoring the activity.
In Dummy Mode, the LED indicators operate in monitoring
condition but monitoring activity is off or on.
Loading ActiveX From:
This field is used to specify the location of Xplug Control
(ActiveX) plug-in program. Enter the information as required
in .ocx format, for example:
http://www.<your company>.com/xplug.ocx, where <your
company> must be replaced with your company’s DNS server.
Or it can be installed from the CD come with the IPCam
SECURE300.
Open Second Port:
The Web Server field allows settings to open a second port for the
IPCam SECURE300. This will permit users IP Sharing
Gateways to support multiple IPCam SECURE300s. By default,
Port 80 is always opened for the IPCam SECURE300 Web Server
access. Select “Yes” and input the second port value.
For example: If you have 5 IPCam SECURE300 to be installed,
each with an IP address from
192.168.0.101
192.168.0.102
192.168.0.103
192.168.0.104
To Next Page
Loading...