31
192.168.0.105
You can open the second port for each IPCam SECURE300 from
port 81 to Port 85 as illustrated below:
IPCam SECURE300 1 – IP 192.168.0.101, second web port 81
IPCam SECURE300 2 – IP 192.168.0.102, second web port 82
IPCam SECURE300 3 – IP 192.168.0.103, second web port 83
IPCam SECURE300 4 – IP 192.168.0.104, second web port 84
IPCam SECURE300 5 – IP 192.168.0.105, second web port 85
You also need to setup your DSL gateway for Port Mapping.
Port 81 map to 192.168.0.101
Port 82 map to 192.168.0.102
Port 83 map to 192.168.0.103
Port 84 map to 192.168.0.104
Port 85 map to 192.168.0.105
The Transfer Image field allows settings to open a second port for
the IPCam SECURE300 to transfer images. The default Port
8481 is open image transfer and you can define a second port
similar to the above.
Save/Cancel:
After making sure all settings in the System are correct, click the
“Save” button to store the settings for the IPCam SECURE300.
You can alternatively click the “Cancel” button to restore all
settings to the values last saved to or retrieved from the IPCam
SECURE300.
To Next Page
Loading...