Genius P6533 - Page 43

English
-43-
5
Use the four-way controller (
) to access the paper selection setting,
then press the OK button to confirm.
[Size]: You may select the desired item depending on the type of printer
being used.
[Borderless]: You may select the desired item depending on the type of
printer being used.
6
This starts printing and displays the message “Transferring” on the LCD
monitor screen. The message will disappear after the printing is finished.
Then the screen returns to [Printing Mode Select].
 To cancel printing:
Pressing the button during print data transfer displays the screen for
selecting whether to [Continue] or [Cancel] printing.
In [Print All] Mode: Lets you print all images with PictBridge.
Step Procedure
1
If you wish to print all the images stored in the camera, you may choose
[Print All] in [Printing Mode Select].
2 To set Print Settings, follow steps 2 to 6 in [Print] Mode.
In [Print With DPOF] Mode: This function only lets you print the specified image
based on the previous DPOF settings.
Step Procedure
1
If you wish to print images with DPOF setting, you may choose [Print With
DPOF] in [Printing Mode Select].
2 To set Print Settings, follow steps 2 to 6 in [Print] Mode.
NOTE
 When connecting a printer which is not compatible with DPOF, [Print With DPOF] cannot
be selected.