Genius P6533 - Connecting to a Pictbridge Compliant Printer

English
-42-
CONNECTING TO A PICTBRIDGE
COMPLIANT PRINTER
Even if you do not have a computer, you can connect the camera directly to a printer
that supports PictBridge to perform image selection and printing using the camera
screen and controls. DPOF support also lets you specify which images you want to
print and how many copies of each should be printed.
Connecting the camera to the printer
1. Rotate the mode dial to
and turn your camera on by pressing the power
switch.
2. Press the four-way controller (
) to select the [Set-up2] menu, then use the
four-way controller (
) to select [USB Mode]. Press the OK button.
3. Use the four-way controller (
) to select [PictBridge], then press the OK button.
4. Connect your camera and the printer via the supplied USB cable.
 The message “One moment” will appear on the LCD monitor screen.
Printing images
When the camera is properly connected to a PictBridge-compatible printer, the
[Printing Mode Select] screen is displayed on the LCD monitor screen. Use the
four-way controller (
) to select the print mode.
In [Print] Mode: Lets you print the specified image with PictBridge.
Step Procedure
1
Use the four-way controller (
) to select the [Print] mode, then press the
OK button.
2
Use the four-way controller (
) to select the image you want to print,
then press the four-way controller (
) to set more detailed settings.
3
Use the four-way controller (
) to select by your preference, then press
the OK button.
[Quantity]: Specifies the number of prints. Select a number up to 10.
[Date]: If you select [With], images are printed with the date.
[File Name]: If you select [With], images are printed with the file name.
4
After Print Setting is set, the print icon
is marked on the displayed
image. You can still use the four-way controller (
) to change the image
by your preference, then press the OK button to print.