Operator Manual
Operation 4.19 © Genmega 2012
CASSETTE TOTAL
The Cassette Total function prints a report
detailing the number of bills that have been
loaded into the cassette and how many
bills were dispensed, either to the
customer, the reject bin or used during a
dispenser test. This report will show totals
from the last time you ran a Cassette Total
to the current date. After the Cassette
Total has been printed, all the values will
reset to zero.
NOTE: Running a Cassette Total is the
only way to clear the Settlement value back
to zero bills. After the Cassette Total has
printed you will be prompted on the screen
that the total has printed and to press the
Enter key to return to the menu.
TRIAL CASSETTE TOTAL / TRIAL DAY TOTAL
These reports are identical to pressing Day Total or Cassette Total, the only difference being that
they will not zero out the amounts. This report is useful if you wish to know current Total statistics
without closing them out. To run these reports, simply press the button and the report will print.
Press Enter when finished to return to the Settlement Menu.
NOTE: Trial Day Total can be set to process automatically at a preset time. See Section 3.2.7 for
information on automated scheduling of a Trial Day Total.
To Next Page
Loading...
Need help?
General