Step Description
☞
The batteries are inserted in the front of the laser.
1. Slide the locking mechanism on the battery compartment to the
right and open the cover of the battery compartment.
2. To remove the batteries:
Remove the batteries from the battery compartment.
To insert the batteries:
Insert the batteries into the battery compartment, ensuring that
the contacts are facing in the right direction.
☞
The correct polarity is displayed on the battery
holder.
3. Close the cover of the battery compartment and slide the locking
mechanism to the left until it locks into position.
Batteries 53
To Next Page
Loading...
Need help?
General
