GeoVision GV-IP Decoder Box Series User Manual

Introduction
3
1
1.2 GV-IP Decoder Box Plus
GV-IP Decoder Box Plus is designed to decode incoming IP streams from GeoVision and
third-party IP devices. It serves as a medium for connecting the cameras and the monitor for
video display in Single View, Quad View, and 9-Division View. It supports third-party IP
cameras that adhere to RTSP or ONVIF and is able to automatically search for
ONVIF-compliant third-party IP devices under the same LAN. To be used with only a monitor,
the GV-IP Decoder Box Plus provides a cost-effective solution for video surveillance as
opposed to the traditional DVR and PC setup. The security administrator can monitor
channels, take snapshots of critical moments, and pause at a channel when events occur.
GV-Joystick V2 can be installed to control GeoVision and third-party PT / PTZ / Speed Dome
cameras.
The IP Devices and GV-Software that Can Connect with GV-IP Decoder Box Plus
Figure 1-2

GeoVision GV-IP Decoder Box Series Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box Series
Category	Digital Camera
Language	English