GeoVision GV-IP Decoder Box Series User Manual

Accessing Live View
45
3
3.3 Fisheye Dewarping
You can enable fisheye dewarping if the fisheye camera is in Single View or Grid 1 of the
Quad View. Right-click the live v
iew of the fisheye camera and select Fisheye to enable
fisheye dewarping.
Note: Fisheye dewarping is only supported by GV-IP Decoder Box Plus.
Figure 3-3
The following fisheye settings are available:
 Image Alignment: Align the red circle with the inner edge of the camera image if
needed. You can adjust the red circle by dragging and by scrolling the mouse.
 Camera Modes:
 Fisheye: Quad view: Composed of 3 PTZ views and a circular source image.
 Fisheye: 360 degree: Composed of two PTZ views and one 360º panoramic
view.
 Fisheye: Dual 180 degree: Composed of two 180º views.
 Fisheye: Single view: Composed of one PTZ view.
 Mount Ceiling / Mount Wall / Mount Ground: Select according to where the camera is
mounted.

GeoVision GV-IP Decoder Box Series Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box Series
Category	Digital Camera
Language	English