GeoVision GV-IP Decoder Box Series - Chapter 1 Introduction; GV-IP Decoder Box Ultra

Introduction
1
1
Chapter 1 Introduction
1.1 GV-IP Decoder Box Ultra
GV-IP Decoder Box Ultra is designed to decode incoming IP streams from GeoVision and
third-party IP devices. It serves as a medium for connecting the cameras and the monitor for
video display in Single, 4-Division, 8-Division, and 9-Division View. It supports third-party IP
cameras that adhere to RTSP or ONVIF and is able to automatically search for
ONVIF-compliant third-party IP devices under the same LAN. To be used with only a monitor,
GV-IP Decoder Box Ultra provides a cost-effective solution for video surveillance as opposed
to the traditional DVR and PC setup. The security administrator can monitor channels, take
snapshots of critical moments, and pause at a channel when events occur. GV-Joystick V2
can be installed to control GeoVision and third-party PT / PTZ / Speed Dome cameras.
The IP Devices and GV-Software that Can Connect with GV-IP Decoder Box Ultra
Figure 1-1