GeoVision GV-IP Decoder Box Series - Add Devices Using GV-IP Utility

34
2.7 Adding Devices Using GV-IP Device Utility
You may utilize the GV-IP Device Utility to add channels.
Note: The compatible version of GV-IP Device Utility must be V8.6.6.0 or later for GV-Pad
Mini and V8.7.2.0 or later for GV-IP Decoder Box Ultra.
Before you start, make sure that all the IP devices / software must be under the same LAN as
the GV-IP Decoder Box Series / GV-Pad Mini.
Figure 2-13