GeoVision GV-IP Decoder Box Series - GV-IP Decoder Box Lite

Introduction
5
1
1.3 GV-IP Decoder Box Lite
GV-IP Decoder Box Lite is designed to decode incoming IP streams from GeoVision and
third-party IP devices. It serves as a medium for connecting the cameras and the monitor for
video display in Single View and Quad View. It supports third-party IP cameras that adhere to
ONVIF and is able to automatically search for these third-party IP devices under the same
LAN. To be used with only a monitor, the GV-IP Decoder Box Lite provides a cost-effective
solution for video surveillance as opposed to the traditional DVR and PC setup. The security
administrator can monitor channels and pause at a channel when events occur. GV-Joystick
V2 can be installed to control GeoVision and third-party PT / PTZ / Speed Dome cameras.
The IP Devices that Can Connect with GV-IP Decoder Box Lite
GV-IP Decoder Box Lite
GV-IP Camera
3rd party IP cameras
(ONVIF)
Analog camera
LAN
GV-Video Server
Figure 1-3