52
Configure the lock function by enabling Lock Operation (for GV-IP Decoder Box Ultra) /
Login window (for GV-IP Decoder Box Plus / Lite / GV-Pad Mini) to manage users’
accessibility. Once you enable the function, you must enter the User Name and Password if
you have been idle for a specified time period.
Idle / Wait Time: Specify an idle time from 30 to 300 seconds.
Only for GV-IP Decoder Box Ultra / Plus / GV-Pad Mini, you can specify the following
functions to be locked or unlocked after the specified time period. Enter the User Name and
Password again to unlock the functions.
Camera Switch / Lock Play Control
PTZ Control / Lock PTZ Control
Volume Control / Lock Audio Control
Full Screen Control / Lock Full screen
Capture Snapshot / Lock Capture Snapshot
Lock Dewarp Control
Note: Fisheye dewarping is only supported by GV-IP Decoder Box Plus.
*combine the note with the explanation of lock dewarp control, e.g. the function is only
available for xxx.
Click Save to apply the settings.
To Next Page
Loading...
