GeoVision GV-IP Decoder Box User Manual

Getting Started
13
2
2. To configure the IP address, follow the steps below.
A. On the main menu, select the
icon and press OK. This window appears.
Figure 2-7
B. If you want to use the IP address assigned by the DHCP server under the LAN,
select Yes for the DHCP option, and press OK to confirm.
C. If you want to set up a static IP address, type the network information as required
and press OK.
D. The system will restart and the green LED will fade. Wait for the green LED to return.
3. To configure ID and password for GV-IP Decoder Box, follow the steps below.
A. On the main menu, select the
icon and press OK. This window appears.
Figure 2-8

GeoVision GV-IP Decoder Box Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box
Category	Network Hardware
Language	English