Getting Started
27
2
10. To connect directly from GV-IP Decoder Box, follow the steps below.
A. On the main menu of GV-IP Decoder Box, select
and press OK to search. The
channels of GV-Mobile Server will be listed.
Figure 2-25
B. To select channels, press the up and down arrow keys (No.4, Figure 1-4) and press
the right arrow key. The yellow shows the cursor position and the selected channels
will be in red.
C. Press the OK key. The selected channels will be displayed.
11. To connect using GV IP Device Utility, follow steps in 2.5 Displaying Channels Using GV
IP Device Utility.
To Next Page
Loading...
