GeoVision GV-IP Decoder Box - Page 32

26
D. Click the Matrix Setting button. The window appears.
Figure 2-24
E. Select a matrix pattern from the top.
F. Click and drag channels from the device tree.
G. Click OK.
8. Click Apply.
9. To preview, right click the channel in the left menu, and select one of the following:
 View Actual Stream: Watch the channel view received by the GV-Mobile Server.
 View Encode Stream 1: Watch the channel view set up in step 6 (for single channel)
or step 7 (for matrix view).
 View Encode Stream 2: Stream 2 will not be received by the GV-IP Decoder Box.