GeoVision GV-IPCamera Series Firmware User Manual

146
4.8.5 IP Filter Settings
The Administrator can set IP filtering to restrict access to the camera.
Figure 4-42
To enable the IP Filter function:
1. Enable IP Filtering: Enable the IP Filter function.
2. Filtered IP: Type one IP address or a range of IP addresses you want
to restrict the access.
3. Action to take: Select the action of Allow or Deny to be taken for
the IP address(es) you have specified.
4. Click Apply.

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English