xvi
Note for Connecting to GV-System
/ GV-VMS
The GV-IPCAM is designed to work with GV-System / GV-VMS, a hybrid
or digital video management system. Note the following when the
camera is connected to GV-System / GV-VMS:
1 By default, the images are recorded to the memory card inserted in
the GV-IPCAM (except GV-IR Arctic Box Camera and Target
Series, which are not equipped with a memory card slot).
2 Once the camera is connected to the GV-System / GV-VMS, the
resolution set on the GV-System / GV-VMS will override the
resolution set on the camera’s Web interface. You can only change
the resolution settings through the Web interface when the
connection to the GV-System / GV-VMS is interrupted.
To Next Page
Loading...
Need help?
General
