GeoVision GV-IPCamera Series Firmware User Manual

Accessing the Camera
49
3
3.2.12 Digital PTZ
Note this function is only supported by GV-IPCAM H.264 firmware
V2.06 and the GV-IPCAM H.265.
This function allows non-PTZ cameras to simulate PTZ movements on
live view.
1. Right-click the live view and select Digital PTZ. The live view is
labeled with “DPTZ” at the top left corner.
Figure 3-16
2. To zoom in / out, move the cursor to the live view and click the
corresponding buttons. To bring the view back to its default image,
click Home.
Figure 3-17

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English