50
3. To pan and tilt the view, zoom the image first and then click and
hold the arrow on the image. The arrow appears when you place
the cursor in one of the eight directions, i.e. up, down, left, right, left
up, left down, right up and right down.
Figure 3-18
4. To adjust the transparency level of the control panel, click the
green DPTZ button and select Transparency. Ten levels range
from 10% (fully transparent) to 100% (fully opaque) are available.
Note: The Focus In / Out and the speed level are not functional for
Digital PTZ.
To Next Page
Loading...
Need help?
General
