DVR Configurations
215
7
7.3 Remote Monitoring with Multi View
You can use the Multi View to monitor and manage the camera.
Note: Multi View is not supported by GV-VMS.
7.3.1 Connecting to the IP Camera
1. On the Multi View window, click the Edit Host button. The Edit Host
window appears.
2. To create a host, click the New button. You need to create a group
before creating a host.
3. Select GV-IP Camera, GV-IP Speed Dome from the Device drop-
down list. Type the host name, IP address, user name and password
of the camera. Modify the default VSS port 10000 if necessary.
Figure 7-11
4. Click Save to establish connection.
To Next Page
Loading...
Need help?
General
