Get Packed GPAS-158 - Factory Setting Page; Counter Page

28
4.5 Factory Setting Page
This is for factory setting usage only, change the setting will have no warranty protect.
4.6 Counter Page
This machine is equipped with strap cycle counter, furthermore it is allowed to be reset on
this counter.
➢ How to reset counter?
In the Counter Page, press Potentiometer, then it will show as below to enter
password (same as SERVICE MODE password), press Potentiometer to confirm.
Then it will show RESET, please rotate and press Potentiometer to confirm.
FACTORY SETTING
PASSWORD: _ _ _ _
COUNTER
COUNTS _ _ _ _ _ _ _ _
COUNTER
PASSWORD: _ _ _ _
COUNTER
RESET NO/YES