9
1.6 Before Operating
⚫ Verify that the power line voltage is correct.
⚫ The machine must be properly grounded to avoid a shock hazard. All wiring must be in
accordance with local wiring standards.
⚫ The strapping machine can only be operated with polypropylene (P.P.) strapping; do
not use polyester (PET) strapping or polyethylene (PE) cord strap.
1.7 During Operation
⚫ The weight of the package cannot exceed 70kg. For package weight over 25kg, it may
be necessary to use lifting aids for handling; while package weight over 40kg, it's
necessary to handle it with conveyor system.
⚫ The size of the package should not be less than 70 mm × 20 mm (2.75 inches × 0.75
inches).
⚫ While running, check the unit for any unusual sounds or smoke emissions.
⚫ Keep away from the inside of the arch while the machine is operating; do notyou’re
your hands or body into the arch when the machine is running.
NOTE: It is normal for the heater tongue to smoke during the sealing operation.
1.8 After operating
⚫ Remove dust and dirt from the unit
⚫ Turn off the power when the machine is not in use.
To Next Page
Loading...
