24
4. OPERATING THE MACHINE
There are many functions of the machine in LCD Display, showing as below
4.1 Main Page
Main page shows current situation of machine and also is able to adjust tension setting.
(A) Shows current strapping mode (operation mode):
➢ MANUAL STRAP READY
It means under manual mode, the machine will do strap only when operator press
Start Button.
➢ AUTO STRAP READY
It means under auto 1 strap mode, the machine will automatically do one strap
when table sensor is ON
➢ CONTI STRAP READY
It means under continuous strap mode, the machine will automatically keep doing
straps until table sensor is OFF
(B) Shows current tension setting:
➢ 0% - 100%:
When operator press the Potentiometer, this number will twinkle, then operator
could rotate Potentiometer to change the value. And operator can press the
Potentiometer again to confirm the value.
➢ SOFT:
No matter what is current tension setting, as long as operator pressing SOFT
TENSION Button, then the machine will directly go to soft tension mode. If the
Operator press SOFT TENSION Button again, then the machine will go back to set
tension value.
To Next Page
Loading...
