41
◼ Sliding table Unit & Separator Unit
➢ Lubrication on moving mechanism , especially lubricate on following structures:
◼ Clamps Unit
◼ Sliding table Unit & Separator Unit
Note: Do not lubricate on any bandway or guide where transport strap.
Monthly Maintenance:
➢ Please take out END GRIPPER UNIT and WELDING CLAMP UNIT to do complete
cleaning and lubrication
➢ Please clean both sides (upper/lower) of Heater Plate
➢ Please check all structure with spring if working smoothly
➢ Please clean dust around sensor, limit switch
➢ Please clean dust accumulated on rollers (Pool Feed Roller, Tension Roller, Feed Roller)
To Next Page
