Component Description
P1 button
For Windows 10:
Starts the G-Camera application.
For Windows 7:
Starts the Getac Camera program and serves as the
shutter release button.
P2 button Opens or closes the OSD Control Panel.
When pressed longer:
Serves as the Ctrl+Alt+Del keyboard keys.
P3 button
Enables or disables the auto rotate function of the
screen.
P4 button
Serves as the trigger button for the barcode reader if
your model has the module.
Microphone Receives sound and voice to record voice.
NOTE:
The hardware buttons (except the power button) can be re-defined
using G-Manager.
Some of the hardware buttons provide keyboard key functions on
“POST/BIOS Setup/Non-ACPI” occasions. (See “Button Functions on
Special Occasions” in Appendix A for information.)
To Next Page
Loading...
