Getac S410 Series User Manual

85
Using Recovery Partition
When necessary, you can restore your Windows system to the factory
default state by using the “recovery partition” feature. Recovery partition is
a portion of your SSD that is set aside by the manufacturer to hold the
original image of your system.
WARNING:
 Using this feature will reinstall Windows to your system and configure it
to the system’s factory default settings. All data on the SSD will be lost.
 Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
To restore your system to the factory default state:
1. Connect the AC adapter.
2. Run BIOS Setup Utility. Select Advanced  Recovery Partition. (See
Chapter 5 for more information.)
3. Follow the onscreen instructions to complete the process.

Getac S410 Series Specifications

General

Processor	Intel Core i5/i7
Graphics	Intel UHD Graphics
Display	14" FHD (1920 x 1080) LCD
RAM	Up to 32GB DDR4
Storage	Up to 1TB PCIe NVMe SSD
Operating System	Windows 10 Pro
Weight	2.2 kg
Rugged Features	MIL-STD-810H certified IP53 certified
Wireless	Wi-Fi 6, Bluetooth 5.0
Ports	HDMI
Security	TPM 2.0, Smart Card Reader
Battery	Removable Li-Ion