Getac S410 Series User Manual

24
Using the Tether (Optional)
You can purchase a stylus and tether for your computer model. Use the
tether to attach the stylus to the computer.
1. Insert one of the tether’s loop ends through the hole of the stylus (as
indicated by

below). Then, insert the other end through the first loop
(as indicated by

below) and pull it tight.
2. Insert the other loop end to the hook on the computer (as indicated by

below). Then, insert the stylus end through the loop (as indicated by

below) and pull it tight.
3. When not in use, store the stylus in the stylus slot.
CAUTION: Be careful the tether does not get in the way when you connect
the computer to the office or vehicle dock.

Getac S410 Series Specifications

General

Processor	Intel Core i5/i7
Graphics	Intel UHD Graphics
Display	14" FHD (1920 x 1080) LCD
RAM	Up to 32GB DDR4
Storage	Up to 1TB PCIe NVMe SSD
Operating System	Windows 10 Pro
Weight	2.2 kg
Rugged Features	MIL-STD-810H certified IP53 certified
Wireless	Wi-Fi 6, Bluetooth 5.0
Ports	HDMI
Security	TPM 2.0, Smart Card Reader
Battery	Removable Li-Ion