56
5. Fit the new SSD module into place. The security latch should be engaged
in the locked position ( ).
6. If needed, tighten the screw to further secure the SSD module.
System Memory Upgrade
You can upgrade your computer by expanding system memory.
CAUTION:
It is not recommended that you buy and install RAM modules by yourself.
If you want to expand system memory, please ask Getac service center to
install DRAM modules for you so that full compatibility can be guaranteed.
RAM modules are extremely sensitive to static electricity. There are cases
where static electricity generated by the human body has adversely
affected such modules. When inserting or removing a RAM module, do
not touch the terminals or internal components, insert objects other
than the module, or allow foreign particles to enter. Doing so has been
known to cause damage, fire, or electrical shock.
To install the RAM module:
1. Disconnect the AC adapter and remove the battery pack(s).
2. Carefully place the computer upside down.
3. Remove four screws (
) and use a tool to pry open the compartment
cover (
).
To Next Page
Loading...
Need help?
General
