26
Using the WLAN
The WLAN (Wireless Local Area Network) module supports IEEE 802.11ax.
Turning On/Off the WLAN Radio
To turn on the WLAN radio:
Select the network icon in the lower right of the taskbar. Then, select the
Wi-Fi button.
To turn off the WLAN radio:
You can turn off the WLAN radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane
mode. You can control the Airplane mode using one of the below methods.
Select the network icon in the lower right of the taskbar. Then, select
the Airplane mode button.
Press Fn+F1.
Connecting to a WLAN Network
1. Make sure that the WLAN function is enabled (as described above).
2. Click the network icon in the lower right of the taskbar.
3. In the list of available wireless networks, click a network, and then click
Connect.
4. Some networks require a network security key or passphrase. To connect
to one of those networks, ask your network administrator or Internet
service provider (ISP) for the security key or passphrase.
For more information on setting a wireless network connection, refer to
Windows online help.
To Next Page
Loading...
Need help?
General
